Additional Powermanager Procedures

Select any of the procedures for additional information on powermanager reports.

 

Prerequisites:

  • System Manager is in Operating mode.
  • System Browser is in Application View.
  • The Report definition root node is selected.

 

Stop the Communication
  • The powermanager extension is started and communicates with the devices.
  1. Select Applications > Powermanager.
  1. Click Stop to stop the communication of the devices with the powermanager extension.

 

Monitor an Area and Sector
  1. Select Applications > Powermanager.
  1. Select the area or sector whose details you want to monitor.
  • The Overview tab displays along with the Measurement Values tile.
  1. You can view the following values that display in a tabular structure in Measurement Values.
  • Sector Name
  • Device Name
  • Measurement Point
  • Value
  • Unit

 

Create New Report Folder
  1. Select Applications > Powermanager > Report definition.
  1. Click Create and select Create Folder.
  • The New Object dialog box displays.
  1. Enter a name and description and click OK.
  • A new report folder is created.

 

Edit a Report Definition or a Report Folder
  1. Select Applications > Powermanager > Report definition.
  1. Select the report definition or folder to be edited.
  1. Click Edit .
  1. Select Save .

 

Delete a Report Definition or a Report Folder
  1. Select Applications > Powermanager > Report definition.
  1. Select the report definition or folder to be deleted.
  1. Click Delete.
  • A confirmation message displays.
  1. Click OK.
  • The selected report definition or report folder is deleted.

 

Configure the Cost Center Report
  1. You have selected the Cost Center report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, the Create Maximum, Minimum and Average Values check box is unchecked by default. Select this check box to include the maximum minimum and average values in the report.
  1. Click New to add a new device.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can add multiple devices and generate a Cost Center report.
  1. Enter values into the following columns:
    a. Select the required measurement point from the drop-down list under the Measurement Point (Energy) column.
    b. Unit
    c. Factor
    d. Converted Unit
    e. Select the required Medium from the list.
    f. Select a Cost Center from the list of available cost centers.
    g. The Weighing Factor displays as configured. It is the proportional assignment of the counted consumption values for the selected cost center, expressed as a decimal factor.
    h. Select the required measurement point from the drop-down list under the Measurement Point (Power Demand) column.
    i. Unit
    j. Factor
    k. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Cost Center report definition is configured.

 

Configure the Load Duration Report
  1. You have selected the Load Duration report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, select the Create Maximum, Minimum and Average Values check box.
  1. Click New.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can add only one device to the Load Duration report.
  1. Enter values into the values following columns:
    a. Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Load Duration report definition is configured.

 

Configure the Load Variance Report
  1. You have selected the Load Variance report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, select the Create Maximum, Minimum and Average Values check box.
  1. Click New.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can add only one device to the Load Variance report.
  1. Enter values into the following columns:
    a. Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Load Variance report definition is configured.

 

Configure the Top 10 Energy Report
  1. You have selected the Top 10 Energy report type for configuration.
  • The Report Definition configuration page displays.
  1. From the Source expander select either Active Energy or Reactive Energy to display the respective value for the top 10 devices.
    NOTE: You can drag the device to the Source expander to add a device as an alternative procedure.
  1. Select the Exclude check box adjacent to the device names to exclude it during the report generation.
    NOTE: All physical devices in the system are displayed in the exclude list and by default none of the devices is checked. At least one device in the exclude list should not be selected.
    Logical devices are not considered for the top 10 value consumption.
  1. Click Save .
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Top 10 Energy report definition is configured.

 

Configure the Absolute Energy Report
  1. You have selected the Absolute Energy report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, select the Create Maximum, Minimum and Average Values check box.
  1. Click New to add a new device.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can add multiple devices and generate the Absolute Energy report.
  1. Enter values into the following columns:
    a. Select the required measurement point from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. (Optional) Select the Sum check box to display the summation of the selected measuring points.
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Absolute Energy report definition is configured.

 

Configure the Standard Report
  1. You have selected the Standard report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, select the Create Maximum, Minimum and Average Values check box.
  1. Click New to add a new device.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can configure multiple devices and generate a Standard report.
  1. Enter values into the following columns:
    a. Select the required measurement point from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. (Optional)Select the Sum check box to display the summation of the values of the selected measurement point over the defined duration.
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Standard report definition is configured.

 

Configure the Total Energy Report
  1. You have selected the Total Energy report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, click New.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can add multiple devices and generate a Total Energy report.
  1. Enter values into the following columns:
    a. Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Total Energy report definition is configured.

 

Configure the Energy Analysis Report
  1. You have selected the Energy Analysis report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, select the Create Maximum, Minimum and Average Values check box.
  1. Click New.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
  1. Enter values into the following columns:
    a.
    Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point (Energy) column.
    NOTE: You can configure only one device and generate a Energy Analysis report.
    b. Unit
    c. Factor
    d. Converted Unit
    e. Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point (Power Demand) column.
    f. Unit
    g. Factor
    h. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Energy Analysis report definition is configured.
Configure the Power Peak Report
  1. Select the Power Peak report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Source expander, check the General Limit check box to apply a general threshold limit to all measurement points under the Measurement Point column.
  1. (Optional) If the General Limit check box is checked, enter the value of the limit to be applied in the text field and click Apply.
  • The entered limit is applied to all the measurement points under the Measurement Point column.
  1. Click New.
  1. Select a device from the Device drop-down list for which the report needs to be generated.
    NOTE: You can configure multiple devices and generate a Power Peak report.
  1. Enter values into the following columns:
    a.
    Select the required measurement point for which the report needs to be generated from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
    e. Limit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Power Peak report definition is configured.
Configure the Delimitation Report
  1. You have selected the Delimitation Report type for configuration.
  • The Report Definition configuration page displays.
  1. In the Main expander, Report Type displays, Delimitation, the type of the report.
  1. In the Source expander, click New to add a new device and configure the following:
  • Device: Allows you to select the device.
  • Measurement Point: Allows you to select the required measurement point.
  • Unit: Displays the unit.
  • Factor: Displays the factor.
  • Converted Unit: Display the converted unit.
  • Delimitation Group: Allow you to select the delimitation group.
    The following two combinations are available for configuration of Delimitation Reports:

Feed-In

Feed-Out

Total consumption

Own generation

Own consumption

Own consumption Self-generated

Own consumption grid

Third party consumption measured

Third party consumption estimated

Mandatory

Mandatory

Optional

Mandatory

Mandatory

Mandatory

Mandatory

Mandatory

Optional

Mandatory

Mandatory

Optional

Mandatory

Optional

Optional

Optional

Mandatory

Mandatory

 

  • Click Save.
  • The Delimitation report definition is configured.

 

Monitor Trends
  1. Select Application > Powermanager > Trends.
  1. Select the trend to be monitored.
  • The trend data of the selected trend is plotted.
Configure the Sankey Report
  1. You have selected the Sankey report type for configuration.
  • The Report Definition configuration page displays.
  1. To configure the Sankey report perform any of the following steps:
  • In the Source expander, click the Sync icon to synchronize the devices in the Powermanager node with the Sankey Tree node.
  • In the Source expander, click on Create icon to add a new node to the Sankey tree.
  1. Enter the name of the root node in the Root Name field.
  1. Enter the root unit in the Unit field.
  1. Click New to add the required Measurement Point to the selected group/element in the Sankey tree.
  1. Enter values into the following columns:
    a. Select the required measurement point from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Sankey report definition is configured.

 

You can create a new node within the Sankey tree after the use of the Sync function.

 

Load Secondary Pane
  • powermanager is started.
  1. Select Applications > Powermanager.
  1. Right click Powermanager node.
  1. Select Send to the Secondary Pane.
  • Secondary pane is loaded.

The output in the secondary pane depends on the selected node. For more information see reference section.

Edit Reports Manually
  1. Select Application > Trends > ManualCorrection.
  1. Select the area and device from the navigation pane.
  1. Select the measurement points to edit from the measurement point dropdown device.
  1. Select the Manually Corrected Values check box.
  1. Click Save.
  1. Run the modified data in the Trends pane.
  • The manually corrected value is displayed in Application Viewer tab.
View Manually Corrected Reports
  1. Select Application > Report Definition > Application Viewer.
  1. Click Execute in the Parameter window to execute the changes.
  • The modified values is displayed in the background of the Application Viewer tab in blue and the font is displayed in bold and italics.